|
Wed, Jun 30, 10 at 1:32
| Hey guys i need some help and thought someone here would be able to help. When my contractor installed our gas shut off valve in the kitchen they used a 3/4" shut off valve, now we got our range and it has a 1/2" flex tubing which obviously won't fit the shut off valve. Now what is the proper way of fixing this? is there a simple adapter i can buy or does the whole shut off valve need to be replaced? |
Follow-Up Postings:
|
| Black iron reducing coupling 3/4" x 1/2" and short black nipples |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Plumbing Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.