Return to the Plumbing Forum | Post a Follow-Up

 o
Programming Softener

Posted by kellerk2 (My Page) on
Mon, Apr 15, 13 at 22:17

I need some help programming my new Fleck 7000sxt, 1cf (SST 60) softener that I just installed.

Iron: 3 mg/L
Hardness (as CaCO3): 264 mg/L
Alkalinity (CaCO3): 361 mg/L
TDS: 349 mg/L
Sulfate (SO4): <0.21 mg/L
Sulfur: <0.22mg/L
Manganese: 31.9 ug/L
Chloride: 1.20 mg/L

Two people in household, one bath.

I would like to regen about every 4 days because of my iron content.

I have the user manual so I can figure out how to navigate the menus, I just need to know what I should change in order to get the correct salt dose, etc...

Thanks


Follow-Up Postings:

 o
RE: Programming Softener

I copied this into your original thread and answered there so all of the relevant information would stay together.


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Plumbing Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here