Return to the Plumbing Forum | Post a Follow-Up

 o
Steel bath tub.....how can I get rid of scratches?

Posted by fiddleddd (My Page) on
Sun, Mar 20, 11 at 18:16

We're renovating a house, and the contractor recommended a simple steel bath tub in the basement because it won't be used very much. We just wanted to make sure there was at least 1 tub in the house since we're making the upstairs bathroom into a shower stall only.

During the renovations the tub has become scratched, and it's too late to replace it. I know of places that can repair fiberglass tubs, but what would I do to repair/restore a steel tub to its original sheen?

Please help! Thanks so much!


Follow-Up Postings:

 o
RE: Steel bath tub.....how can I get rid of scratches?

You may be able to polish them slightly, but it is hard to remove them and them restore a uniform gloss.

The coating is not very thick, and not nearly as smooth under the surface layer.


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Plumbing Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here