|
Tue, Mar 12, 13 at 8:43
| I have an radiant heat set-up with staple up between joists and in slab for garage. Overall there is about 1000 feet of 1/2 inch tubing throughout including garage. Using recirc with tankless. Option on tankless is set-up for monitoring of temp every 1/2 hour by tankless unit and automatic firing of boiler if temp is greater than 9 degrees below set temp. I have set temp at 135, but temp only gets up to 111 degrees after running about 12 hours plus. I have two 1/25 hp pumps on system, one pushing water on suply side and other pulling on return. Both pumps are hot at 12 hrs+. Do I need bigger pumps? Do I need to up the set temp? Any input would be appreciated Thanks, Wyomike |
Follow-Up Postings:
Post a Follow-UpPlease Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Plumbing Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.