Return to the Plumbing Forum | Post a Follow-Up

 o
abv's in central heating.

Posted by aland973 (My Page) on
Tue, Feb 26, 13 at 18:08

Have a bog standard fully pumped, vented, c/h system.
Had to drain and refill system recently. Bleeding air from the system was bit of a saga, but eventually successful. However, as part of the saga, I traced the system and found that the 2 fitted system ABV's are fitted in "return" pipework instead of the "supply" side of the system. This contradicts all the literature I've found. Will my experience of system bleeding be a more pleasurable experience if I move the ABV's to the supply pipework?


Follow-Up Postings:

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Plumbing Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here