Return to the Plumbing Forum | Post a Follow-Up

 o
Iron filtration advice

Posted by kellerk2 (My Page) on
Tue, Feb 26, 13 at 11:54

nevermind

This post was edited by kellerk2 on Fri, Mar 1, 13 at 10:09


Follow-Up Postings:

 o
RE: Iron filtration advice

The numbers need units in order to be useful.

Additionally, TDS, alkalinity, and sulfur compounds will affect your choices.

This post was edited by aliceinwonderland_id on Tue, Feb 26, 13 at 13:08


 o
RE: Iron filtration advice

Sorry about that.

Iron (total Fe): 6.16 mg/L
Hardness (as CaCO3): 264 mg/L
Alkalinity (CaCO3): 361 mg/L
TDS: 349 mg/L
Sulfate (SO4): <0.21 mg/L
Sulfur: <0.22mg/L
Manganese: 31.9 ug/L
Chloride: 1.20 mg/L

Anything else? most of the other results are metals (mostly below detection limits)


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Plumbing Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here