Return to the Plumbing Forum | Post a Follow-Up

 o
Bathroom Fixtures - SAE or Metric?

Posted by j969k (My Page) on
Fri, Feb 3, 12 at 11:18

Hi,

Long time lurker. Decided to add a floor to my existing house. Many thanks for the good posts in helping to make decisions.

In the bathrooms, we have mainly Kohler and Toto - all within the past 2 years. We also have some yet to replace Moen and American Standard - range of years.

For the hex key / allen wrenches and nut sizes on these fixtures, do they all follow a single standard - SAE vice metric? Or is it going to depend on the specific fixture?

Thanks!


Follow-Up Postings:

 o
RE: Bathroom Fixtures - SAE or Metric?

In the USA to receive code approval they must by SAE, but that does not mean to say that some homeowners don't buy off the internet from overseas, then makeshift rig the fixture in place....LOL


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Plumbing Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here