Hiya, Looks like you really have your work cut out for you. It might be really helpful to visit some established gardens in Vegas to learn more about what really works down there. I visited the Gardens at the Springs Preserve when I was at a Landscape Confrence 4 years ago, and have remained on their mailing list. I can't belive the scope of classes, tours and demonstartions they offer, it's absolutely wild! It is under 4 acres and is very walkable, and everything is well i.d'd Looks like it has been established at least 10-12 years, so you can see some nice, fairly mature specimens. I believe it is sponsored by the SNWA(S. Nevada Water Authority.) Reno needs to catch up I'm afraid; we have a botanical garden at Rancho San Rafael park, but its pretty feeble by comparison. Larger than its Vegas sibling, but less info is disseminated.Maybe things will change w/ the new director Bill Carlos who recently came aboard. Here is a link to the Gardens at the Springs Preserve: http://www.springspreserve.org/html/gardens_visitor_information.html I don't know what the topography + architecture is like at your parents new house (probably a stucco ranch, flat as a pancake?) but you might want to introduce some mounding with some rocks/boulders. Quite a few interesting gropundcover and perennial plants will enjoy growing in this type of situation, plus it makes it easier for your folks in that they don't have to bend + kneel so much. Also investigate container gardening (on a separate drip zone). I saw some really cool planters in Vegas, that thrived in a patio setting. Some were very elaborate and had ornamnetal grasses combined with different annuals that trailed out of the pots.Very luscious! Good luck in your gardening adventures down south! Here is a link that might be useful: Gradens @ Springs Preserve

Thanks, alisande. I keep plugging away on some of my childhood memories. Ex: Bird sh*t & Idiots on FB. I'm subbing in a computerr lab again the next two days so I may be able to post another soon. Thanks for the reminder. Ron

Hi, Doris. Actually it is a shrub behind the azalea- Mock Orange. I don't know why it looks blue- it's white. I probably manipulated the picture trying to bring out more orange in the azalea or something.

Because I hate spaghetti wiring and rats' nests, I think my foremost consideration in laying out a box is to come up with a "visual design" that will be neat and orderly. If, for example, a panel has only a single long neutral bar, I'll tend to place the two-pole 240V circuits on the opposite side since they don't need a neutral. But I'll also take into consideration where the wires enter the box. The heavier guages that are stranded (e.g., #8 and larger) have more of a mind of their own and don't cooperate as well as the smaller guages in holding intentional bends and angles, so I like to let them take simple, "natural" paths to their terminals wherever possible and minimize the necessity for making sharp bends within the the box. In choosing the best wiring pattern I can come up with, a great deal depends on where the branch circuits come from. For example, circuits served by main panels located in basements very often come predominantly from above (i.e., enter the box at the top). Where that's the case, I like to place the smaller circuits below the larger ones so that the small guage wires have the longer paths with the most bends. With AFCI and GFCI breakers becoming more and more common, I also take into account the runs of the neutral pigtails from these "specialized" breakers to the neutral bar. Not only can those pigtails quickly contribute to ugly box clutter, but they won't always reach a neutral bar from all slots. (And who wants to have to splice on an extender?) Also, many of the AFCI/GFCIs are wider than ordinary breakers, so I try to place them in an area with plenty of space where their "porches" have a minimal impact on other wiring runs and where they don't obstruct access to ground bars and/or neutral bars. To the extent possible, I try to organize breakers in sets representing my idea of "logical groupings." Thus, bedrooms and general lighting circuits tend to end up clumped together, kitchen-oriented stuff ends up in another line of adjacent breakers, while furnace, well-pump, hot water and sump pump are clustered in another segment, and so forth. And, yes, I try to do at least a decent "seat-of-the-pants" balancing across poles, taking into account my best guesses on what things tend to draw power at the same time as well as the actual load demands. It's not always possible to optimize on all these variables simultaneously and I don't consider any of the above to be hard-and-fast rules. When all is said and done, I suppose I'm more of a neat freak than anything else. I really like a box that looks clean and orderly with like-type wires (e.g., neutrals and equipment grounds) running in parallel "visual channels" that are easy to follow and easy on the eyes. I guess we all have our OCD quirks, eh?