2023: "Popping off the plastic part of the switch" as suggested by fotwell_mines_edu is indeed easy but these details may help: The part you are removing is the entire plastic assembly that is visible and touch-able when the switch is installed, which sits on top of the metal plate you attach to the wall, and includes both the paddle (the on/off switch) and the plastic frame around it (which has the dimmer slider). Although I guess you can pop it off with a fingertip, I used a small flatblade screwdriver to press the little clip that holds the plastic assembly in place. On the end of the plastic assembly that has *two* short protrusions holding the assembly to the metal, those two protrusions are the clips you need to press down — in the direction of the center of the switch — while lifting the plastic away from the metal via a fingernail or what not in the shallow opening on the side the plastic frame, close to the same end that has the two protrusions. The plastic assembly did indeed come off easily and without any breakage, once I figured all this out. Be gone, nasty locator light.

There is a San Diego? based Co that sells very similar backlit panels that look exactly like stone but arent. They really look like stone and are sold with the backlighting system. I believe NorthCounty Tile has them in their showroom. Great design work. I wish I could put our pics into every waterproofing comment on here. This is an example where a complicated waterproofing system is needed not a simple tub/shower.

Hi, I have the cafe 36, professional all gas with brushed bronzed knobs and they are not backlit. I don’t know if the electric oven or the wifi enabled version might have this feature. I’d go to the GE cafe website and ask this question in their forum. They’re pretty good about responding, may take a day or two though.

Millworkman - so we don’t have to worry about the wood expanding and contracting? Also I was concerned about the surface size of the wood that screws into the wall. Verbo - good idea about the medicine cabinet. I don’t know that we will find the size we need and we don’t want to see the back with the lights. It needs to be smaller than the mirror itself.