I took that Nightengale pledge when I graduated in 1968. I don't know if that is still a practice today or not. It really doesn't hold any legal or binding power. Some of the language is obviously rather antiquated, while the concept itself remains valid. But more importantly there are in each of the 50 states (I don't know about Canada) State Boards of Nursing. They are the licensing body & they exist solely to enforce the law and rules regulating practice. They "protect the public". If your are having an "issue" with a nurse or nurses I would suggest that you first speak to the Nurse Manager. If that is unsatisfactory, go up the chain of command, to the Director, Vice President of Nursing, & if necessary the CEO of the facility. If that fails, file a complaint with the State Board (or the equivalent in your country).

I have two units AC/furnace units: a 4 ton/basement and a 3 ton/Attic. I did not get a 64 slot panel in the first place because what I have is what came with the house! Anyway, this is all getting more involved as I need to consider the following: 1)this is the time to upgrade my panel since I will need to get permits to work on the generator but my breakers are Thomas&Betts. Will I need to replace the panel and all the circuit brakers or are there any compatible UL brakers? 2)Will I need to upgrade my gas pressure? I have standard meter that holds up to 325K BTUs. 3All installers are familiar with generac but all I have read is that generac has many customer service problems. Is this still valid? the comparable cumins Onan is about $1200. Is it worth the extra expense? thank you to all who have answered and are helping to educate me.

The T70.3150 should fit with the 562 series. I purchased mine at A&H Turf Specialties and after reading off the complete # on the tandem plus glides that's what they sent. Give them a call. Make sure you're putting them in correctly as I put several in backwards. Once you get the hang of it they clip in quickly. One tip is when you get to the bottom drawers unscrew the front of the tandem plus, clip on the T70.3150 and then screw the track back in. Otherwise the blumotion is a bear to clip on. A&H assured me I wouldn't have to cut the backs of the drawers but they were wrong. I spent $25 on a Black and Decker jig saw and notched the drawer 4.75" on each side (NOT the 3.75" the Blum diagram shows) and everything went smoothly. Best of luck to you. The Blumotion is a really nice addition for not a lot of $.

We have them and they're supposed to be used to see if we're in a patient's room so there are fewer over head pages (noise on the unit). Unfortunately, they don't use them like they're supposed to be used. I get a hundred freaking phone calls/and or overhead pages a day...like today. I can be in the room and they still call me or call out over the intercom when I don't answer my phone because I'm gowned and gloved in an isolation room. I was so happy when my phone battery died around 6 pm tonight. What really annoys me the most is when you just left a patient's room after making sure they don't need anything and they call you back for something. You're busy with another patient and they expect you to drop everything and run back to their room NOW. If you can't go right NOW they call over and over and over again. To make matters worse we are having to take groups of patients on a certain team now so that the doctors can round with us every morning...which they aren't doing. So, for the past few days I've had patients all over the unit, so we're running our @sses off even more than usual. My legs and back are killing me. Sorry, I know that's more than you were asking.