|
Fri, Oct 8, 10 at 17:11
| Planning on putting Aura over 10 year old oil. Was given BM QD-30 Stain Blocking primer at BM, but going by BM's own primer chart I'm assuming 024 alkyd (orange can) would have better adhesion.
Should I switch the QD-30 out for the BM Fresh Start All-Purpose Alkyd or will either adhere to scuffed/deglossed oil fine? |
Follow-Up Postings:
|
- Posted by christophern (My Page) on Fri, Oct 8, 10 at 17:41
| Switch. If it were me,I would just go with the latex Fresh Start and forget the oil. |
|
| Yeah I just called BM's help line and they told me to go with 046 over oil and under Aura. It's the Superior 100% Acrylic Fresh Start. Guess I'll try to exchange for that. Thanks! |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Paint Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.