|
Thu, Jun 23, 11 at 12:01
| I am almost ready for painting the few strips of alum. flashing on the exterior of house.
The way I understand my other questions that were answered I can go ahead and a) wash the strips with paint thinner first. b) prime with zinsser Bulleyes 123 int. ext primer(cannot find gardtz in my area) c) paint with a 100% acrylic exterior paint Am I on the right track? Thanks. Have I got my |
Follow-Up Postings:
|
| BONDZ, not Gardz, would the correct one. 123 is fine too though! Just make sure you wipe flashing with a paint-thinner or preferably Lacquer-thinner. Faron |
|
| Thank you Faron. I am set to go. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Paint Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.