|
Mon, Feb 13, 06 at 12:19
| I remember reading that someone knew how to adjust the labeller so that the labels printed out shorter? I can't remember who it was..but I would really like to know how to do this. |
Follow-Up Postings:
|
- Posted by talley_sue_nyc (My Page) on Mon, Feb 13, 06 at 15:50
| I do, I do--I'll have to look at home. See if there's something about the "###" setting (or the "#" or "##"....); You can change the default to some setting like that; but then you have to remember to feed a little tape out before you cut. It's the same setting you would use for printing multiple labels at once; see if there's something in the index for that. I'm not near my owner's manual; I'll look tonight, and post back w/ topic header, etc., and maybe even the instructions themselves.
|
|
- Posted by talley_sue_nyc (My Page) on Mon, Feb 13, 06 at 16:28
| try this terminology (look in the index) "tape margin function" Also, |
|
| Thanks Talley Sue..I'll check it out. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Organizing the Home Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.