|
Mon, Oct 10, 11 at 20:07
| Hello, we recently had the bathroom renovated in our 100+ year old house and had a new water baseboard heater installed. Yesterday we turned on the heat for the first time ever since moving in and since the renovation, and the bathroom heater is not working. The other original heaters on the third floor where the bathroom is located are working fine. I did some reading where it was suggested that one bleed the heater, however I see no valve anywhere on the new baseboard heater. I should also mention that I went to the second floor and tested the exposed pipe that feeds the bathroom radiator on the third floor, and it only warms up at the very bottom, the top is cold. Please help! |
Follow-Up Postings:
|
- Posted by christophern (My Page) on Tue, Oct 11, 11 at 4:19
| Call who ever installed it. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Old House Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.