Return to the Old House Forum | Post a Follow-Up

brass ideas/experience needed.....

Posted by lizbeth-gardener (My Page) on
Mon, Sep 27, 10 at 1:43

We have solid brass doorknobs and hardware. I just took the lacquer off of one and it cleaned up nicely. Now am not sure what I want to do for a finish, as the freshly cleaned brass is a bit too bold on the dark stained old doors. Is there something I can do other than let them oxidize to get a "not so bright" brass finish?? If I just leave them natural, will they get dirty looking quickly?

Follow-Up Postings:

RE: brass ideas/experience needed.....

Brass will naturally age, or as you put it, get "DIRTY". Every finish that is added to brass is done to replicate, most unsuccessfully, that "DIRTY" look, so why not save the time, money and energy of faking it and let it just occur. is it really that horrific that you cant live with it for a few months ? There is nothing as beautiful or desirable as perfectly aged brass.

here's a story: I put new reproduction brass handles on a 200 year old dresser and my SO was VERY unhappy since they were so shiny. In about 9 months the brass had already darkened a bit and he even said they looked perfectly in keeping with the 200 year old dresser.

RE: brass ideas/experience needed.....

old house j i m: i guess i didn't word my post well. i'm o.k. with the current oxidation of the knobs. i just wondered if they will just look like dull brass or if they will eventually look awful. if they do look awful, are they easy to clean up since they are no longer lacquered? the hardware on this house is the original (1918) and the lacquer is half off most of the knobs and makes them look filthy rather than just dull or having a patina-that is my concern.

RE: brass ideas/experience needed.....

OH MY - dont lacquer them - heres what happens, like you notice, half the lac. wears away, the other half gets crappy - alternatively, WAX them after they age a bit (to your liking) - the wax will still allow some oxidation but they are easier to clean and the wax comes off with a swipe of some turpentine of soap and water and can quickly be reapplied- OR, just leave em alone - your hands will wear off some of the oxidation and you'll end up with that LOVELY high low pattern that so many reproductions attempt, but never achieve - just one note: make sure you wash the brass really well after you install it - any residue from fingers, cleaners, paint thinner, etc. will ruin the natural aging your after - BEST OF LUCK.

RE: brass ideas/experience needed.....

old house j i m: Thanks for all the great info. I think I will just leave them natural with no wax, but just in case I change my mind down the road, what kind of wax are you referring to??

RE: brass ideas/experience needed.....

ok, sit down, get a pen and paper, heres how I do it cause even though this seems like a lot, im lazy and dont like buffing wax.

I put on 1-2 coats of car wax, let dry, then buff with an old shoe brush (horsehair, you can get them at a drugstore for about $3). The car wax is usually tougher and longer lasting than most others. Then i put on a coat of dark brown tinted wood wax, I have liberon, but usually any that is tinted deep brown will work.

What this does is hide the white residue from the wax that usually is near impossible to remove in teh grooves of old hardware. It will also impart a little of that antique glow we all love so much. You can use the tinted wax alone, but will have to clean off and reapply it more often.

JUST BE SURE ITS DRY - it will stain everything if you dont let it dry long enough ... thats it - youll love your old brass ...

RE: brass ideas/experience needed.....

Old_house_j_i_m: lol!! I had it all wrong? "Herb Alpert & the Carnuba Brass"? Sorry - been holding that in for hours & couldn't take it any longer. :-)
Seriously, thanks for that suggestion. I got a lot of old (I guess brass) doorknobs, and "plates" for them (?) when my dear friend passed away last year. They've been boxed up because I haven't known how to deal with them. (In more ways than one, I guess). They're in sorry shape, she intended to sell, not use, as antiques. As with many of these things I've ended up with, of hers. Now I'm hopeful that I can use them in my home - where they seem like they'd belong.
Car wax. Who'd have thought? Lol!

RE: brass ideas/experience needed.....

old house j i m: Thank you so much for sharing your knowledge and experience. Having gardenweb to connect with people like you is such a gift! Liz

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!

Return to the Old House Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.

Learn more about in-text links on this page here