| My suggestion would depend on how many you plan on cutting and if you plan on doing any future projects that would include metal cutting. The way I see it the cheaper options would include: 1. Metal cutting blade in jig saw. Would work for a few cuts, could be very cheap if you've already got a jig saw. 2. Same as #1, but with reciprocating saw. 3. Good old hacksaw. 4. A 4-1/2" angle grinder (DeWalt, Milwaukee, etc.) with a 1/16" thick cut off wheel. Can be difficult to control until you get used to it. Other more expensive, better options would be: 1. Any brand of 14" chop saw, similar to a miter saw for wood, but uses an abrasive blade. $120-$150. 2. Portable bandsaw, notably Milwaukee. Probably close to $300. 3. Small horizontal bandsaw for metal cutting (4"x6" capacity). All foreign made, all the same, choose your brand........probably right at $200. Cheapest available at Harbor Freight Tools. My personal reccomendation if you plan to cut a lot of metal. I have one and could not live without it. Hope that helps.....David | 
