|
| I am trying to replace some weld on steel barrel hinges. I can not find them locally and am having trouble finding the size I need.
On the internet, I have found 5 inch, 7 inch and 7 3/4 inch barrel hinges. How are they measured? Are the measured from weld on plate to weld on plate or are they measured from barrel to barrel? If measured from barrel to barrel, my hinges are 6 inches. Each barrel is about 3 inches.The outside diameter of the barrel is 1 3/8 inches. If measured from back plate to back plate it is almost 7 inches (more like 6 3/4). The back plate measures 1.5 by 3 inches by 3/8 of an inch thick. The pin is a 3/4 inch pin and the pin is about 2 inches long. The gap between the post and gate with the barrel hinge installed is just a little over 2 inches.
Can anyone help me?
|
Follow-Up Postings:
|
| maybe try here http://www.mcmaster.com/ search for hinge and you get a big list |
|
| That is most likely a Blacksmith Brand Large Weldable Barrel Hinge. You can get them from Triple-S Steel at 800-231-1034 |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Metalworking Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.