|
| I'm trying to find someone locally with a brake press to make me two small SS shelves. Or possibly someone who is willing to do it and ship to me for a reasonable price.
Here is a description;
These would be made from .080" (or so) stainless and have two 90 degree bends. Length of shelf one would be 27" long and the other 32". The width of the blanks would be approx. 6.250". They would be bent length wise with one bend 2" from one edge and the other 1" from the other edge forming a U shaped channel with unequal sides and the inside width of the bottom at 3.250" (+/- .080"). The bend radius would be approx .200" (or whatever die close to that that you have). You would not have to "finish" the ends or round the corners. I can do that. I live just north of Marysville WA. Any advise or takers? |
Follow-Up Postings:
|
| Our Harbor Freight has press brake for $200. Or CraigsList. Heating + Cooling guys are the best benders for that thin stuff. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Metalworking Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.