Return to the Metalworking Forum | Post a Follow-Up

 o
Metal Studs

Posted by pete_p_ny (My Page) on
Mon, Oct 22, 07 at 7:29

I bought some metal studs to frame around some soffits.

Felt it would be easier to snip and work my way along.
However, those metal stud metal scews...they stick out from the surface of the stud a bit...what happens when you install the sheetrock...does it rest on the surface of the screw? Does it intent into the screw. I am envisioning it looking lumpy because it the sheetrock will rest on "top" of the screw at the stud connection to the top/bottom rails, but then suck in a bit on the areas away from the screw. I know I must be interpreting all this incorrectly because they are used frequently. But I am very curious.


Follow-Up Postings:

 o
RE: Metal Studs

The drywall is normally pressed hard enough to dent over the screw heads.


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Metalworking Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here