Return to the Metalworking Forum | Post a Follow-Up

 o
Rust on Metal Roof

Posted by shw001 (My Page) on
Wed, Sep 21, 05 at 12:36

I have a 55-year old terne metal flat roof that has some rust spots, totaling about 10 square feet out of 300 square feet. It has been coated every few years with a fiber-aluminum-asphalt paint that leaves a shiny gray finish. How would you treat these rust spots prior to repainting with the same fibered-aluminum paint? (I believe terne is steel coated with a lead/tin alloy)

I came across a product called "Rust Bullet" that claims to convert the rust to a hard inert substance that could then be painted. Does anyone have any experience with this product? Here is their URL
http://www.rustbullet.com/productcart/pc/viewCart.asp

Thanks


Follow-Up Postings:

 o
RE: Rust on Metal Roof

I came across another rust treating product called Rustoleum Rust Reformer. It comes as a liquid that you brush on or as an aerosol. Anyone have any experience with this product? It sounds like it does the same thing as Rust Bullet, but I cannot tell wheter it is the same chemical or not.

Thanks.


 o
RE: Rust on Metal Roof

You might also try Rustoleum Red Primer - the one with fish oil in it. I would let it weather for a season before giving it a top coat, though, and I don't know how well it might adhere to intact terne plating. I used some on my galvanized shop roof last fall, I'm going to check on it this weekend and see if it looks ready to paint with an aluminum top coat.

I would clean everything up, get any oil/grease off the intact terne.


 o
RE: Rust on Metal Roof

I`ve used a product that called oxisolve, it works good you spray it on an let it sit. This stuff is safe and easy to use. One gallon with last a long time it`s on the expensive side around $30.00 for a gallon. But it looks like this is getting to be a yearly repair. they have new products for treating rusty surfaces, but this is the only one I`ve used. This is what the web site says about this rust remover

This specially formulated Rust Remover is a powerful, rust-fighting liquid created to meet the needs of auto restorers. It reaches even inaccessible areas, quickly dissolving iron oxide completely and leaving a zinc phosphate coating. Rust Remover can be sprayed, brushed, or used as a parts dip. It is non-toxic, non-flammable and reusable.

I just used it to remove rust from a expensive commercial lawn mower deck, It`s treated now and just needs paint.Nice and smooth surface all the heavy rust deposits are gone.I also used it the treat a running board from my wifes grandfather model TT ford truck that was rusting away. It`s now painted satin black with wrought iron shelf brackets she uses it for her angel collection, looks nice on a wood paneled wall.

Here is a link that might be useful: Eastwood


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Metalworking Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here