|
Sat, Jul 14, 07 at 21:49
| I'm toying with the idea of fabricating my own copper range hood. I'll say up-front that I have no (zero-zilch-none) metalworking experience. I am a fairly skilled woodworker, for whatever that's worth, and I'd say i have good mechanical ability and a high capacity to learn.
Having said all of that, I admit again that I have no idea where to start, but I view this as an opportunity to expand my skills. So, am i out of my mind? Please let me know if I'm nuts to tackle this. If not, please point me in the right direction (tips / advice / resources). And yes, my wife thinks I'm nuts. Thanks! Rob |
Follow-Up Postings:
|
| On the kitchen forum, allison0704 fabricated a hood out of copper sheeting. See the link below for a picture. |
Here is a link that might be useful: allison's copper hood
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Metalworking Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.