|
Mon, Jun 27, 05 at 21:10
| I am making a trellis from copper tubing. My design calls for finials on the tops of the 4 vertical pieces. I will need two finials for the 3/4 in. and two for the 1/2 in. round tubing. I'm planning for 3 to 5 in. long spears.
I have found finials on the web but they are either for lamps (too small), roof tops (too large) or for fencing. The fencing type will work well if I can find them with round bases to fit the copper tubing; most are square. I would prefer bronze or copper. Cast or wrought iron is okay too. Or, any metal that can be plated. There are so many wonderful suggestions on the gardenweb sites, I just know there's help for me. Thanks, Julie
|
Follow-Up Postings:
|
- Posted by ROSCOESTAN (My Page) on Fri, Jul 1, 05 at 9:35
| I don't know where you live but there is a place in Toronto that has finials of all sizes. They will ship too. http://euroforgings.com/main.html Hope this helps. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Metalworking Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.