Return to the Metalworking Forum | Post a Follow-Up

self sealing copper

Posted by mylab123 (My Page) on
Tue, May 30, 06 at 13:37

I bought an old copper tray which had tarnished underneath the sealing. I have stripped off the varnish and would like to re-seal it myself - what would be the best product to use to have the best results? I would have it professionally sealed but there is no one in the area that offers this service.


Follow-Up Postings:

RE: self sealing copper

Clear spray lacquer.
Deft is very good.

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!

Return to the Metalworking Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.

Learn more about in-text links on this page here