|
Wed, May 14, 08 at 10:54
| I have a 3/16" threaded rod that I bought from HD. I'd like to encase it in a steel tube - it's an axel - for strength. Any idea on where I can buy a steel tube with I.D. of no more than .25 inch? It's going to be less than 3 feet long. (Online sources are fine.) |
Follow-Up Postings:
|
- Posted by poohbear2767 (My Page) on Thu, May 15, 08 at 0:20
| http://www.metalexpress.net/ I have ordered from the 3rd one before. If you could use iron water pipe it mite be cheaper. Pooh Bear |
|
| Wow, thanks! I already tried one of those, but both of the other 2 had something that I think will work. They each had the same tube, but the price at one place was 4 times the price at the other place. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Metalworking Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.