Thought I'd share some pics of recently finished projects.........

First up is a gear puller I had to fabricate to remove a pulley of the gardent tractor. It uses a 1/2" hex coupling nut and the arms are 1/4"x3/4" bar stock. Holes for adjustment and red paint for ease of locating.

Next is a small, but tall, metalworking table for more detailed work the brings it up to a level I'm more comfortable with (I'm 6'-2"). The top is 1/4" plate, 24" square and the legs are 2" SCH40 pipe that was scrap (free!). Painted bluish/gray because I had that color on hand. It's nice to have a tall table for some projects!

Last one is a cart for the recently aquired Miller 180SD TIG/Stick machine and Argon cylinder. Fairly straight forward design; the handle is a fold down unit meant for a Yamaha generator that I adapted to this cart. The cylinder is attached using a chain that fits over a threaded stud and is tightened in place with a the orange "T" you see in the pics (hex nut welded to a 1/2" pipe nipple). Painted blue to match..........

Thanks for checking these projects out! David