|
Tue, Apr 12, 11 at 19:24
| I have a wrought iron fence around my property. We had the fence put in 2 years ago. I need to have the driveway entrance made wider. They would need to take out a panel on each side of the gates. I have a long driveway behind my house but it is very narrow and I am having a hard time getting my car into my drive. I am wondering if this is going to be very expensive to do. I haven't called the company who put up the fence yet, do I have to go with them or will another company be willing to do the work? I appreciate your comments. |
Follow-Up Postings:
|
- Posted by konrad___far_north (My Page) on Sun, May 29, 11 at 0:08
| It might be late now, I would first get a quote from the original builder, then get a second from another if it sounds unreasonable. |
|
- Posted by summerblue (My Page) on Sun, Jul 17, 11 at 22:36
| Thank you for your response. I guess my question was kind of stupid, but I didn't know if another company would do the work on a fence they didn't install. I did reach the original company but I have yet to hear back from them. I think I will be looking for someone else. Thanks again. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Metalworking Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.