GatorBlades need mods.....
Hi lads,
Dont know how safe an this is but I'll put it up here and ye might let me know your feelings about this before I carry on....
I ordered up some gator blades from the US and they duly arrived a few days later. Problem is I never mentioned to the nice chap that I have counter rotating blades with a rear discharge deck. I received blades, all with same rotation direction. After a bouncing a few e-mails back and forth with the supplier, I'm told, Gator Blade dont make a set of blades to suit my european machine.
Its teasing me whan I see one blade will work fine the other not, so I got to thinking about re shaping one of the blades to suit. I tried using a hydraulic press and a V former to reverse one of the bends but the negative angle I had to achieve to reverse the bend I needed was severe and a bit scary to say the least. So, next thought is to heat up the bend site with oxy/acet and maybe not have to put such a severe neg bend with the press? I'm concerned with lots of things but safety of the final product is paramount. Should I even be doing this from a safety point of view....?
Thanks,
Kev
mal5898
KevC___IrelandOriginal Author
Related Professionals
Jacksonville Furniture & Accessories · Queens Furniture & Accessories · Belle Glade Interior Designers & Decorators · Fountain Hills Interior Designers & Decorators · Arlington General Contractors · Davidson General Contractors · Dunkirk General Contractors · Hillsboro General Contractors · La Marque General Contractors · Lake Forest Park General Contractors · New Bern General Contractors · Saint Paul General Contractors · Wichita Siding & Exteriors · Augusta Siding & Exteriors · New Port Richey East Siding & Exteriors