|
Tue, Feb 15, 05 at 21:33
|
I am hoping that someone can offer some guidance for me on this question. I need to place a machine railing or a set of bollards in front of my furnace and water heaters in my garage.
Since this is a house and not an industrial or commercial site, is there any thing out there that you know of that looks better than these things? Has anyone out there had a sheet metal manufacturer make one for them or do you know of an attractive alternative? Thanks in advance for your help!
|
Follow-Up Postings:
|
- Posted by LouisWilliam (My Page) on Wed, Feb 16, 05 at 13:37
| Bollards are posts that are used in a garage to prevent somebody from driving a vehicle into a fuel using or storing appliance. Here in MA, we generally sink a 4" steel tube in the ground befor pouring the floor and fill it with concrete. You want something strong, and I don't think sheet metal would cut it with the inspectors I know. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Metalworking Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.