|
Sun, Feb 15, 09 at 12:28
| This door plate is 20" long. I need to place a 2" hole about 6" above the knob. Wat kind of shop can do this? |
Follow-Up Postings:
|
| You may be able to get a sheet metal shop to cut a hole, or just use a hole saw. Clamp the metal between some plywood. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Metalworking Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.