Return to the Metalworking Forum
| Post a Follow-Up
Adapting a door plate
| | |
Posted by nosambos (My Page) on Sun, Feb 15, 09 at 12:28
| This door plate is 20" long. I need to place a 2" hole about 6" above the knob. Wat kind of shop can do this? |
Follow-Up Postings:
RE: Adapting a door plate
| | |
You may be able to get a sheet metal shop to cut a hole, or just use a hole saw.
Clamp the metal between some plywood. |
|
|
|
|
