|
Thu, Dec 22, 11 at 19:41
| My MH is alomost 40 years old. The water pressure on all faucets is ver very weak. I am told I need to replace all
water piping. Has anyone done this? |
Follow-Up Postings:
|
- Posted by bus_driver (My Page) on Fri, Dec 23, 11 at 17:59
| What is the original piping material and what is the size of it? Back in the early 1960s (and earlier), 3/8 copper tubing was often used. Low flow rate to be sure. Replacing all the supply piping can be done but restoring the insulation and covering under the mobile home properly is a tremendous amount of work. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Manufactured Homes Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.