|
Sun, Nov 9, 08 at 11:52
| I am moving from one single wide to another. My current home has a very nice and large screen room- all aluminum.I would like to relocate it to my new home.
Has anyone had any experience with this? I know that when mobile homes are moved,things like screen rooms have to be disconnected and then reattached. A friend told me I would have to cut off the roof panels about 3-4 inches from the side of the home to take them off. This seems like alot of work. Any feedback would be appreciated |
Follow-Up Postings:
|
| Don't look like anyone is going to respond so you may want to check out www.mobilehomerepair.com |
|
| If you are located in a wind zone like Florida you can get in a real mess. If a permit is required it's almost certain that they won't issue you a permit to move it. They will require engineering plans to show that it will meet a certain wind level and normally the plans aren't available on older porches. Now if it can be done without a permit.... |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Manufactured Homes Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.