Return to the Manufactured Homes Forum
| Post a Follow-Up
relocating an aluminum screen room
| | |
Posted by diane4m (My Page) on Sun, Nov 9, 08 at 11:52
I am moving from one single wide to another. My current home has a very nice and large screen room- all aluminum.I would like to relocate it to my new home.
Has anyone had any experience with this? I know that when mobile homes are moved,things like screen rooms have to be disconnected and then reattached.
A friend told me I would have to cut off the roof panels about 3-4 inches from the side of the home to take them off. This seems like alot of work.
Any feedback would be appreciated |
Follow-Up Postings:
RE: relocating an aluminum screen room
| | |
| Don't look like anyone is going to respond so you may want to check out www.mobilehomerepair.com |
RE: relocating an aluminum screen room
| | |
| If you are located in a wind zone like Florida you can get in a real mess. If a permit is required it's almost certain that they won't issue you a permit to move it. They will require engineering plans to show that it will meet a certain wind level and normally the plans aren't available on older porches. Now if it can be done without a permit.... |
|
|
|
|
