Return to the Manufactured Homes Forum | Post a Follow-Up

 o
Copper or CPVC for Re-Pipe?

Posted by amritakaur (My Page) on
Sat, Aug 4, 12 at 16:45

Living in the Phoenix-metro valley, I need to re-pipe the water lines in my 1986 Schult singlewide. It has that old polybutylene pipe which recently sprung a leak, causing a lot of damage. I want to replace it before there's another leak.

Most of the plumbers around here recommend PEX, but I don't want it. It's prone to biofilm accumulation, MTBE leaching, and worst of all, rodents like to chew it up. I just found a huge mummified roof rat in a pile of insulation under the house, close to the water pipe. I don't know how it got in through the skirting, but if I had had PEX it would have chewed through it.

That leaves copper or CPVC.

Two plumbers have said the Flowguard Gold CPVC is very reliable. All the other plumbers have disagreed, saying CPVC is garbage and will soon crack and leak.

Copper performs well here, but is almost more than I can afford.

The plumbing is in the crawlspace under the house. It gets extremely hot here, but we seldom have more than the occasional brief, light freeze. I'm going to have the insulation replaced, with bellyboard, after the re-pipe. I also plan on using pipe insulation.

Would any of you use CPVC, or is copper my only safe choice?


Follow-Up Postings:

 o
RE: Copper or CPVC for Re-Pipe?

A test you can do at home is to batter a sample of regular CPVC and a sample of FlowGard Gold with a hammer while the samples are resting on a hard surface. The FlowGard Gold is very impressive in the punishment it can endure.


 o
RE: Copper or CPVC for Re-Pipe?

They steal copper, don't they?


 o
RE: Copper or CPVC for Re-Pipe?

Im thinking I heard you cant use copper anymore?


 o
RE: Copper or CPVC for Re-Pipe?

Of course one call still use copper! Too bad the AZ rats like Pex as it is the best choice.


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Manufactured Homes Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here