Return to the Manufactured Homes Forum
| Post a Follow-Up
Load Bearing Wall
| | |
Posted by
woodyette (
My Page) on
Tue, Aug 7, 12 at 15:36
| Is the center a load bearing wall? I want to remove part to open my kitchen to be more open concept. the house will not be moved again, it is permanent. |
Follow-Up Postings:
RE: Load Bearing Wall
| | |
| Huh? More info is needed, cannot answer from that. |
RE: Load Bearing Wall
| | |
| I want to remove the top of this wall and use as eat at counter |

RE: Load Bearing Wall
| | |
| This is from other end. The area where the white wooden blinds are can be enclosed if I have to for support. |

RE: Load Bearing Wall
| | |
| Can anyone answer my question please |
RE: Load Bearing Wall
| | |
| Any walls that are on the outside when the unit(s) are being moved are load bearing and are critical to the integrity of the unit. Such walls often have metal strapping running at diagonals for bracing. Do not cut or change that strapping. |
RE: Load Bearing Wall
| | |
| In my state (Washington) there is mandatory state inspection and approval of changes that folks want to make to their mobile homes. You might check your state or local agencies or building department to see if there is a similar agency in your state. If so, you could perhaps make an appointment to talk to an inspector informally about what you want to do. If the scope of your work falls under the provisions of your law you would probably have to pay a hefty fee for your permit and get an inspection for the work. |
Post a Follow-Up
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in.
If you aren't yet a member, join now!
Return to the Manufactured Homes Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.