Return to the Manufactured Homes Forum | Post a Follow-Up

 o
Doors

Posted by llmoore (My Page) on
Fri, Jun 22, 12 at 22:57

I would like to know if I can use a pre-hung door for a home in a mobile home. any help


Follow-Up Postings:

 o
RE: Doors

Yes, you can. It might require changing the size of the door opening, which is not a trivial job. It has to be framed in properly. If the existing door is the same size as the prehung door it may Just Work. This is more likely for interior than exterior doors. Measure and measure again, and do not forget to measure how thick the door is, as well as how tall and how wide.


 o
RE: Doors

I'm nearly to the point of replacing my interior doors. The width (30'') isn't as common, but it was in stock at HD. The thickness is the same, and my doors are a bit shorter, but I'm going from carpet to laminate, so I need slightly taller doors, and I believe there's room to trim the door slightly if need be. The biggest difference is the door jamb. The prehung door jambs are about 1'' wider than my current door jambs. My contractor said he can pretty easily trim the door jambs, though.


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Manufactured Homes Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here