|
Sun, Mar 23, 08 at 13:12
| Where does one find the model or serial number on mobile homes?
I looked all around the exterior, and my home inspector looked underneath - to no avail. I'm wondering if a previous owner removed / repainted over the information. There was one tiny oval that looked like a plaque of some kind, but the home inspector said it was too small to be the model/serial number information. Any ideas where else to look? And, if it /is/ that painted-over plaque area, any ideas how to expose it without ruining the exterior paint job? A |
Follow-Up Postings:
|
- Posted by adirondackgardener (My Page) on Sun, Mar 23, 08 at 16:31
| In our modular homes, we put a data plate in the kitchen sink cabinet. Other locatations you might check are inside closets or by the electrical panel. But try looking in kitchen cabinets first. Wayne |
|
- Posted by bestalikat (My Page) on Sun, Mar 23, 08 at 17:49
| Thanks Wayne! I'll look there next time I'm at the site. I'd never have thought to look there. A |
|
- Posted by bus_driver (My Page) on Sun, Mar 23, 08 at 19:49
| It may be on the top of tongue, if permanently attached. Or on the front plate of the frame below the siding material. |
|
- Posted by ken(kensrepair34@gmail.com) onSat, Jun 4, 11 at 9:15
| cant find a serial number any where can u help |
|
- Posted by Derose mobile home(caddiballa@yahoo.com) onSat, Jul 2, 11 at 9:39
| just bought a mobile home made by Derose invader to move it we need a permit. I can't find the serial # anywhere. We took off the skirting the only thing there was on the frame there were 3 numbers someone had scratched on the frame its 933. This mobile home was built for a business late 80's it has 2 offices and a small restroom any ideas where I can find it? |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Manufactured Homes Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.