Return to the Manufactured Homes Forum | Post a Follow-Up

Making a shop out of bedroom

Posted by john_z11 (My Page) on
Thu, Feb 12, 09 at 17:44

I want to remove the back wall and put a roll-up door there, so I can make a work shop out of it.
I want to know if there is anything against doing this. Im the only one living here and this is pretty much where I spend my time.

Or should I look into building a shed?

Thank you John

Follow-Up Postings:

RE: Making a shop out of bedroom

also there is the problem with critters getting in through your door..maybe double doors that open in the center ..out..would give you the same openin but more protection and also maintain the resale value of the home

RE: Making a shop out of bedroom

Thanks, has soon as I posted, I got busy at work and couldn't get back here.

Double doors sound good, or just a larger one would work too. I need to work some things out first, hunting for ideals.

Thanks, John

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!

Return to the Manufactured Homes Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.

Learn more about in-text links on this page here