|
Sun, Nov 28, 10 at 17:18
| Does anyone have an idea how to secure a puck light that has fallen out of the under cabinet hole? The cabinet maker apparently cut the hole slightly too large (the pucks and the wiring were recessed into a hidden, lower section of the cabinets. We don't want to use too permanent of an adhesive in case we might need to get in to repair the lighting at some point.
carrie rose |
Follow-Up Postings:
|
| There should be some wood screws holding the lights in the recess. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Lighting Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.