Return to the Lighting Forum | Post a Follow-Up

 o
Trouble finding 4ft T8 rapid start ballasts

Posted by henhowc (My Page) on
Tue, Oct 19, 10 at 19:02

I am trying to replace/retrofit my T12 light fixture with T8 ballasts and lamps. The fixture is located in my kitchen and is switched on/off quite frequently throughout the day. As such, I would prefer to install rapid-start over instant start ballasts.

However, for some reason none of my local Lowes or Home Deport stores carry rapid start ballasts. I've literally checked 4 different HD stores in the Los Angeles area. Do these chains no longer sell these items?

Can anyone direct me to a B&M store where they might sell these? I'd prefer not to buy them online because of shipping costs and the hassle if I need to return an item. I

Thanks.


Follow-Up Postings:

 o
RE: Trouble finding 4ft T8 rapid start ballasts

Rapid start electronic T8 ballasts seem to be scarce even online. They definitely aren't a mass market item, and you won't find highly specialized items like that at a big box store.

You might try a good local electrical jobber, the kind of place that's open 8-5 M-F, maybe 8-12 Sat, and where you see electricians' vans parked out front.

For T8 lamps, rapid start has largely been supplanted by programmed rapid start and programmed start. These are even better for lamp life than rapid start. They're pretty widely available and reasonably priced these days, though less so than the ubiquitous instant start ballasts.

Programmed rapid start ballasts use the lamp's filaments to preheat the lamp before striking, just like a rapid start ballast. But while RS leaves the filaments powered up (using 1-2 watts continuously), the PRS ballast shuts them down after the lamp is struck. Thus a PRS ballast will prolong lamp life like a rapid start ballast, and will also conserve energy like an instant start ballast.

Where on-off cycling is frequent, a PRS ballast provide about 50% greater lamp life than a rapid start ballast, and about double the life compared to an instant-start ballast (20,000 - 30,000 starts). A PRS ballast will typically cost 50-100% more than an instant start ballast.

Programmed start ballasts are the gold standard for frequent starts, and for this reason are the ballasts of choice for motion-control switch operation. These ballasts use a microcontroller IC to tightly control filament temperature and lamp operating conditions. They deliver 4-5 times the lamp life of an instant start ballast (typically 40,000 - 50,000 starts).

PS ballasts used to be very expensive and hard to find, but (maybe because of the trend toward improved efficiency in public buildings) have become more common in the last few years. I found a GE Ultrastart online at 1000Bulbs.com for less than $25. That's only about 50% more than they get for a GE Ultramax instant start ballast. (FWIW, though there may be others, the Ultramax is the only ballast I've installed so far that has been totally silent.)

Link below. This is for information, not a recommendation - I've never bought anything from 1000Bulbs.com.

Here is a link that might be useful: GE PS ballast


 o
RE: Trouble finding 4ft T8 rapid start ballasts

Wow. Thanks so much for posting this!


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Lighting Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here