|
| Hi friends,
We have plans for a bi-level counter on a peninsula. The cans are being installed tomorrow and electricians suggested putting cans more over the center of the entire counter width, not centered over just the raised part, like we have in the architect's drawing. What do you think? The change may mean that less shadow from the raised part is cast on the main counter. I should mention we have 9 foot ceilings, so the beam will be wide and diffused by the time it reaches the counters. The cans are CREE CR6 LED in Juno housings. Having second thoughts,
|
Here is a link that might be useful: plan and mockup of counter
Follow-Up Postings:
|
- Posted by glostadave (My Page) on Sun, Oct 16, 11 at 15:42
| We decided to align the two cans right over the place where the two levels meet. We'll let you know how it turns out. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Lighting Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.