|
Tue, Aug 7, 12 at 22:34
| I posted this on the Kitchens forum too. here
Here is my floor plan with red circles on one side where I thought the lights might work.
But, I'll have a light over the sink, so the overhead pot light might be too much? Should I just space them 4 feet apart and forget about it? Someone on Kitchens suggested putting them on dimmers, and I like that idea. But the kitchen lights are on a 3 way switch. A dimmer won't work on that will it? Any suggestions welcomed. |
Follow-Up Postings:
|
| The following will be helpful. Yes, dimmers do work with 3 way circuits. |
Here is a link that might be useful: recessed can placement discussion
|
| Thanks, that is really helpful. I'll have to go see what kind of lights we have now. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Lighting Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.