Return to the Lighting Forum | Post a Follow-Up

 o
Replacement trim/upgrades for Lightolier 3 3/4

Posted by chefwong (My Page) on
Mon, May 28, 12 at 16:23

Almost wrapping up painting in the basement. The white baffle trim is a perfect match for the *light green* paint we have chose - BM Silken Pine.

I'd like to increase light output. Currently using 50W 130V Par20. Why 130V..too much vibrations from floor above. Since putting in 130V, no bulbs have gone bad. However, due to this, I'm not even getting the full 50W.

What replacment trim setup might also alternatively work with the Lightolier P20001 housings - 3 3/4 cans ?


Follow-Up Postings:

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Lighting Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here