Return to the Lighting Forum | Post a Follow-Up

 o
cree cr6

Posted by xyz10 (My Page) on
Mon, Mar 4, 13 at 23:04

How much should I expect to pay (per can) if I asked a builder to use Cree CR6 cans instead of their usual can ?


Follow-Up Postings:

 o
RE: cree cr6

The CR6 is a lamp which is designed to fit into any standard depth 6" can. There is no reason to purchase Cree branded can housing.


 o
RE: cree cr6

Thanks for the reply David. Would 50 dollars a bulb be a fair price to pay in additional to the regular price ?

What is needed to get 2 eyeball lights with CREE LED's ?


 o
RE: cree cr6

Depending on where you are located, the CR6 could be ~$35 from Home Depot.

The LE6 is the Cree lamp which has a gimbal fitting (eyeball).

Here is a link that might be useful: LE6 at Polar-Ray


 o
RE: cree cr6

Builder should give you credit for the trim ring (some housing) which is about $10 so his cost would be $25 plus tax. $50 seems a bit much to me.


 o
RE: cree cr6

I'm interested in replacing my existing recessed cans w/ these. On Cree's website it mentioned the dimmer feature. I currently don't have a dimmer on my kitchen recessed lights. Is it necessary to have a dimmer for the CR6's to work properly?


 o
RE: cree cr6

No it is not


 o
RE: cree cr6

Thanks, davidtay!


 o
RE: cree cr6

I have a question regarding the Cree lights. We are doing a large number of can lights but due to budget I don't think we can afford Crees. Is this something we could purchase later and install ourselves? We are NOT handy at all, lol! If so, is there anything special about the can that I should have my builder install now? Finally, 2 of our lights are "eyeball" style. Do we need a different can for those?

Thanks very much!!


 o
RE: cree cr6

Yes.

Nothing special about the can.

The CR6s come with an integrated trim ring which saves some cost (~ $10 - $20).

If you have a standard recessed lamp installation, there is a bulb, trim ring and can.

With the CR6, there only is the lamp/ bulb and the can.


 o
RE: cree cr6

Thank you, David. That's very helpful!


 o
RE: cree cr6

I got a Cree CR6 (EcoSmart brand) bulb from Home Depot to try out. It was very easy to retrofit in a 6" can. Remove the existing bulb. Unclip the springs holding the trim in place. Remove the metal bracket holding the bulb socket, leaving the socket dangling by the wires. Then screw the LED bulb into the socket and push the bulb into the can.


 o
RE: cree cr6

 o
RE: cree cr6

@robj - Thanks for posting that. It is good to hear that they are holding up well so far. After buying other bulbs (incandescent, halogen and CFL) that died prematurely, I was certainly hesitant to spend the extra money on these. We ended up changing out all of the recessed cans on our main floor (11 in all). They do put out more light than the incandescent bulbs that we had been using, which is a nice bonus for us, as we hate dimly lit rooms.


 o
RE: cree cr6

Thank you Robj for posting the Review of the CREE CR-6 LED retrofit bulbs in cans! I really appreciate it.


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Lighting Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here