|
| I have the following sets of cabinets that I need to have undercabinet lighting for
Group 1 - 2 12" Cabinets
I had purchased 3 24" (3 bulb) and 2 8" Xenon bars. They will be on a dimmer. They'll be over a Verde Butterfly granite. I figure one 8" for Group 1, 1 24" and 1 8" for Group 2, 1 24" for Group 3 and 1 24" for Group 4. My GC thinks that's going to be way too much light and think I might want 5 puck lights (1 puck for group 1, 2, 3, and 2 for group 4) total. Thoughts? |
Follow-Up Postings:
|
| Anyone in this forum have any thoughts on this? |
|
| group 1 UPX 322 group 2 UPX 322 + UPX 430 group 3 UPX 430 group 4 UPX 322 + UPX 322 Fixtures have hi/lo switch to give some adjustment without needing a dimmer or you can dim with electronic dimmer. |
Here is a link that might be useful: under cabinet xenon
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Lighting Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.