|
| Hello everyone, great forum and been reading a ton but finally thought I would post my own reno question. Redoing part of our kitchen and need help with the lighting plan.
I have attached an sketch of the part of the kitchen in question with 2 proposed lighting plans. I am going with 6" recessed lights for now, but ideally would like to get down to 4" as you will see in the diagram rafters and skylights are making my life difficult. Over the bar area, I will also be putting in 3 pendant lights, all cabinets have under cabinet fluorescent lighting. Here is the link: http://img7.imageshack.us/img7/6219/kitchenschematictrusses.png Any advice, alternate plans, etc. would be appreciated. Thank you. |
Follow-Up Postings:
|
| Option B seems better. Except maybe for lining up the 2 lights on the fridge side counter with the others. Have you considered the possibility of using the ECO4-575 (Cree CR4) 4" recessed lights? |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Lighting Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.