|
Tue, Feb 3, 09 at 13:26
| I have a nylon banner that measures 2'x8' and I would like to build a light box to backlight it. I've seen this done for headboards, etc, using rope light, but I'm worried about any heat getting too close to the nylon. Also, it would have to be something I can plug into an outlet, not hardwired. Any sugggestions on how to do this? |
Follow-Up Postings:
|
- Posted by arbordomus (My Page) on Sun, Feb 8, 09 at 20:34
| Look at LED ropes or maybe LED Christmas tree lights. The trick would be in the detail used to conceal the lights or frame the banner. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Lighting Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.