OK, it just beeped again. I was wrong, it didn't show any time remaining, it was just the E:13 flashing. I did notice a light humming sound. My hubby took his shop vac and tried pushing/flushing the drain. I then set it to drain; then spin. Both times nothing happened other than that humming sound. I did smell something but don't know if it was the shop vac or the oven...hopefully it is not something burning on the washer. Hubby said to just let it rest a while and that he'd look at it later. I left the door open. I have a feeling this isn't going to be good.

E:13 in in the troubleshooting part of your user manual. It's means you have a blocked pump. You need to access the pump. depending if you have a Nexxt model or a Vision model will depend on how to gain access. Without your model there is no way to tell you

Thanks jakvis. Turns out my hubby was able to remedy the problem. Appreciate it!

Dear beanwabr,

I'm having the exact same problem -- how did your hubby fix it?

Thanks!

Adam