|
Wed, Nov 14, 12 at 16:38
| I am getting a leak that comes from front of machine. Not door or door seal....machine sits on pull out drawer, the leak comes down thru bottom of machine(front) and drips into drawer. It's not a ton of water but a decent drip...it gets a towel wet. Any suggestions? I have not pulled the front cover off yet...waiting to see if anyone can help me out
Thanks
|
Follow-Up Postings:
|
- Posted by fahrenheit_451 (My Page) on Wed, Nov 14, 12 at 17:35
| I believe someone else here encountered this recently and found it to be a tear in the door seal. Also, there are door seal alignment marks on the chassis and the seal. When I took the front off mine the seal marks were out of alignment; easy to adjust and something to be cognizant of when replacing the seal should this be the problem. |
|
| 451...thank you for responding...I took that spring clip off and inspected the boot...found a small hole near where latch is...now I need to track down a new boot and figure out how that works....ha |
|
- Posted by fahrenheit_451 (My Page) on Wed, Nov 14, 12 at 19:54
| @hutchlake, Take a look at this thread: Miele W4840 rubber seal leaking problem People here have the service manual for your washer if you don't have it. Taking the front off your washer is not all that hard. |
|
- Posted by fahrenheit_451 (My Page) on Wed, Nov 14, 12 at 21:38
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Laundry Room Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.