Return to the Laundry Room Forum | Post a Follow-Up

Whilpool Cabrio Spin cycle problems

Posted by MattNYJETS (My Page) on
Tue, Oct 18, 11 at 22:21

I have a Whirlpool Cabrio washer model number WTW5640XW. The machine stopped running the spin cycle correctly. The "Lid Lock" light would flash during the spin cycle and the machine would stop spinning, then time out the cycle leaving wet cloths in the end.
If I ran the machine in Drain & Spin mode it would intermitently work. Any ideals?

Follow-Up Postings:

RE: Whilpool Cabrio Spin cycle problems

Perhaps a bad interlock switch on the lid? I'm just throwing that out there since nobody else has replied might also be a loose connection for the same switch.

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!

Return to the Laundry Room Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.

Learn more about in-text links on this page here